How to clean the dirty surface of Bandpass Optical Filters products
With the rapid development of high technology, Bandpass Optical Filters products have become common in our lives, but many people do not understand how to deal with dirty lenses.

Ultrasonic cleaning is simple and fast, and is suitable for high-volume Bandpass Optical Filters products. Insert the lens into a fixed rack, put it in ultrasonic water, and shake for 15 to 30 minutes.
1. Ultrasonic cleaning
Ultrasonic cleaning is simple and fast, suitable for large quantities of filter lenses. Insert the lens into a fixed rack, put it in ultrasonic water, and shake for 15 to 30 minutes.
Second, the gas method
If the lens is dirty, blow your breath on the dirty lens surface, and then wipe it with a dust-free cloth.
Three, alcohol wipe method
Pour a little ethanol onto the dirty glass surface, and wipe the clean, dust-free wipe from left to right and top to bottom from the lens surface. If you find that it is still dirty, try again until there is no dirt. . (Note: Do not wipe back and forth left and right, the more you wipe, the more dirty it will cause the opposite effect.)
The three methods mentioned above are a summary of the simple cleaning methods for Bandpass Optical Filters products glass.
Tag:
Recommended News
Unleash the Power of Customized UV Bandpass Filters in Optical Systems
UV Bandpass Filters: Enhancing Optical Instrument Performance
Maximizing Precision with Tailored UV Bandpass Filters for Instrumentation
Understanding UV Bandpass Filters in Optical Instruments