Bandpass Optical Filters products Surface Cleaning Related
All Bandpass Optical Filters products are precision optical components and should be handled with as much care as possible without touching the surface. If the surface of Bandpass Optical Filters products remains stained due to long-term use, it is recommended to clean according to the following methods:

1. Use oil-free air or nitrogen with appropriate pressure to remove dust on the surface.
2. Put on dust-free finger cots on your fingers, soak the towel with absolute ethanol (or similar functional solvent), drag the edge of the towel soaked in ethanol, and move it in a single direction on the surface of Bandpass Optical Filters products. Use as light a force as possible during the wiping process, too much pressure may damage the surface of the Bandpass Optical Filters products. The purpose of using the solvent is to dissolve the sticky buildup in the surface residue of Bandpass Optical Filters products. Interference Bandpass Optical Filters products surface film strength is not as good as the substrate. It should be foreseen that any cleaning may degrade the surface at a microscopic level.
Tag:
Previous Page
Recommended News
Unleash the Power of Customized UV Bandpass Filters in Optical Systems
UV Bandpass Filters: Enhancing Optical Instrument Performance
Maximizing Precision with Tailored UV Bandpass Filters for Instrumentation
Understanding UV Bandpass Filters in Optical Instruments